EP3SL340F1517C4N

EP4CE40F23C7N Description  
The Altera Cyclone® IV family is a low-cost, low-power FPGA for those high-volume, cost-sensitive applications, and the devices in this family have high reliability while maintaining high performance. the EP4CE40F23C7N is one of the devices in this family that offers 200 MHz operation over the temperature range of 0°C to 85°C and is suitable for extended industrial and automotive devices.   EP4CE40F23C7N
Features
• Low-cost, low-power FPGA fabric:
• 6K to 150K logic elements
• Up to 6.3 Mb of embedded memory
• Up to 360 18 × 18 multipliers for DSP processing intensive applications
• Protocol bridging applications for under 1.5 W total power
• Cyclone IV GX devices offer up to eight high-speed transceivers that provide:
• Data rates up to 3.125 Gbps
• 8B/10B encoder/decoder
• 8-bit or 10-bit physical media attachment (PMA) to physical coding sublayer (PCS) interface
• Byte serializer/deserializer (SERDES)
• Word aligner
• Rate matching FIFO
• TX bit slipper for Common Public Radio Interface (CPRI)
• Electrical idle
• Dynamic channel reconfiguration allowing you to change data rates andprotocols on-the-fly
• Static equalization and pre-emphasis for superior signal integrity
• 150 mW per channel power consumption
• Flexible clocking structure to support multiple protocols in a single transceiver block
• Cyclone IV GX devices offer dedicated hard IP for PCI Express (PIPE) (PCIe) Gen 1:
• ×1, ×2, and ×4 lane configurations
• End-point and root-port configurations
• Up to 256-byte payload
• One virtual channel
• 2 KB retry buffer
• 4 KB receiver (Rx) buffer
• Cyclone IV GX devices offer a wide range of protocol support:
• PCIe (PIPE) Gen 1 ×1, ×2, and ×4 (2.5 Gbps)
• Gigabit Ethernet (1.25 Gbps)
• CPRI (up to 3.072 Gbps)
• XAUI (3.125 Gbps)
• Triple rate serial digital interface (SDI) (up to 2.97 Gbps)
• Serial RapidIO (3.125 Gbps)
• Basic mode (up to 3.125 Gbps)
• V-by-One (up to 3.0 Gbps)
• DisplayPort (2.7 Gbps)
• Serial Advanced Technology Attachment (SATA) (up to 3.0 Gbps)
• OBSAI (up to 3.072 Gbps)
• Up to 532 user I/Os
• LVDS interfaces up to 840 Mbps transmitter (Tx), 875 Mbps Rx
• Support for DDR2 SDRAM interfaces up to 200 MHz
• Support for QDRII SRAM and DDR SDRAM up to 167 MHz
• Up to eight phase-locked loops (PLLs) per device
• Offered in commercial and industrial temperature grades   EP4CE40F23C7N Applications  
•Wireless Communication
•Embedded Signal Processing
•ASIC Prototyping
•Simulation