MX25R1635FZUIH0

Description MX25R1635F is 16Mb bits Serial NOR Flash memory, which is configured as 2,097,152 x 8 internally. When it is in four I/O mode, the structure becomes 4,194,304 bits x 4 or 8,388,608 bits x 2. MX25R1635F features a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus while it is in single I/O mode.
The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). Serial access to the device is enabled by CS# input.
Features GENERAL
• Supports Serial Peripheral Interface -- Mode 0 and Mode 3
• 16,777,216 x 1 bit structure or 8,388,608 x 2 bits (two I/O mode) structure or 4,194,304 x 4 bits (four I/O mode) structure
• Equal Sectors with 4K byte each, Equal Blocks with 32K byte each, or Equal Blocks with 64K byte each- Any Block can be erased individually
• Single Power Supply Operation - Operation Voltage: 1.65V-3.6V for Read, Erase and Program Operations
• Latch-up protected to 100mA from -1V to Vcc +1V PERFORMANCE
• High Performance- Fast read - 1 I/O: 80MHz with 8 dummy cycles - 2 I/O: 80MHz with 4 dummy cycles, equivalent to 160MHz- 4 I/O: 80MHz with 2+4 dummy cycles, equivalent to 320MHz - Fast program and erase time- 8/16/32/64 byte Wrap-Around Burst Read Mode
• Ultra Low Power Consumption
• Minimum 100,000 erase/program cycles
• 20 years data retention SOFTWARE
FEATURES
• Input Data Format - 1-byte Command code
• Advanced Security
Features- Block lock protection
The BP0-BP3 status bit defines the size of the area to be software protection against program and erase instructions
• Additional 8K bits secured OTP-
Features unique identifier.- Factory locked identifiable and customer lockable
• Auto Erase and Auto Program Algorithm - Automatically erases and verifies data at selected sector or block- Automatically programs and verifies data at selected page by an internal algorithm that automatically times the program pulse widths (Any page to be programed should have page in the erased state first)
• Status Register Feature
• Command Reset
• Program/Erase Suspend and Program/Erase Resume
• Electronic Identification - JEDEC 1-byte manufacturer ID and 2-byte device ID- RES command for 1-byte Device ID- REMS command for 1-byte manufacturer ID and 1-byte device ID
• Support Serial Flash Discoverable Parameters (SFDP) mode
• Support Unique ID (Please contact local Macronix sales for detail information) HARDWARE
FEATURES
• SCLK Input - Serial clock input
• SI/SIO0 - Serial Data Input or Serial Data Input/Output for 2 x I/O read mode and 4 x I/O read mode
• SO/SIO1 - Serial Data Output or Serial Data Input/Output for 2 x I/O read mode and 4 x I/O read mode
• WP#/SIO2 - Hardware write protection or serial data Input/Output for 4 x I/O read mode
• RESET#/SIO3
* or HOLD#/SIO3
* - Hardware Reset pin or Serial input & Output for 4 x I/O read mode or- HOLD feature, to pause the device without deselecting the device or Serial input & Output for 4 x I/O read mode 
* Depends on part number options
• PACKAGE- 8-pin SOP (150mil/200mil)- 8-land USON (2x3mm)- 8-land WSON (6x5mm)- 12-ball WLCSP (3-2-3 Ball Array)