MX29F800CBMI-70G

FEATURESGENERAL
FEATURES
• Single Power Supply Operation - 4.5 to 5.5 volt for read, erase, and program operations
• 1,048,576 x 8 / 524,288 x 16 switchable
• Boot Sector Architecture - T = Top Boot Sector - B = Bottom Boot Sector
• Sector Structure - 16K-Byte x 1, 8K-Byte x 2, 32K-Byte x 1, and 64K-Byte x 15
• Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Temporary sector unprotected allows code changes in previously locked sectors
• Latch-up protected to 100mA from -1V to Vcc + 1V
• Compatible with JEDEC standard - Pinout and software compatible to single power supply FlashPERFORMANCE
• High Performance - Access time: 70ns - Byte/Word program time: 9us/11us (typical) - Erase time: 0.7s/sector, 8s/chip (typical)
• Low Power Consumption - Low active read current: 40mA (maximum) at 5MHz - Low standby current: 1uA (typical)
• Minimum 100,000 erase/program cycle
• 20 years data retentionSOFTWARE
FEATURES
• Erase Suspend/ Erase Resume - Suspends sector erase operation to read data from or program data to another sector which is not being erased
• Status Reply - Data# Polling & Toggle bits provide detection of program and erase operation completionHARDWARE
FEATURES
• Ready/Busy# (RY/BY#) Output - Provides a hardware method of detecting program and erase operation completion
• Hardware Reset (RESET#) Input - Provides a hardware method to reset the internal state machine to read modePACKAGE
• 44-Pin SOP
• 48-Pin TSOP
• 48-Ball LFBGA (6x8mm)
• All devices are RoHS Compliant
• All non RoHS Compliant devices are not recommeded for new design in